easybcd create bootable dvd for windows 7 disk

Reboot the system again and re-enter the Debian installer.Use the dd command to copy the ISO onto the FAT32 partition (make sure you choose the right partition or you could suffer data loss or render the system unbootable).Mount the FAT32 partition with the installation media.However, more steps are required to complete the installation. Reboot the system, set the BIOS to boot to Linux, and you will appear in the Debian installer.Also copy to the FAT32 installation partition the boot/ and.Using the command line, copy the EFI directory from the ISO drive to the EFI partition (NB the EFI partition cannot be accessed using File Explorer).Download the installation ISO and put the file on this media.Create a new partition large enough for the installation media with a little buffer (about 700MB for the Debian netinst CD) and format it as FAT32.Use the Windows partition manager to shrink the existing Windows partition to the desired size, to make room for Linux.NB it's important that you be able to fit the media entirely in memory. I recommend the Debian netinst CD, which is about 600 MB. Here's a sketch of what I was able to do to get Debian Bullseye installed on my laptop that shipped with Windows 10. But it's not for the novice and it's not simple. Make a note of the disk number of the USB drive.It is possible to install Linux on a Windows 10 UEFI/GPT system without any other media. You'll probably be able to spot it based on the drive's capacity. One of the drives listed will be your USB drive. Here, call up a list of disks attached to your PC. This will open in a new command prompt window. In the black command prompt window, open the disk partitioning tool with the command: diskpart Right-click the first result and select Run as administrator. On Windows 10, click Start then type 'command'. Of course, you need to be able to authenticate as the administrator on the PC you're using. You should also insert the Windows 7 installation DVD.Ĭlick Start > All Programs > Accessories and right-click on Command Prompt.

To start, insert your USB flash drive in your main PC-the one with the optical drive. However, they're almost the same whatever operating system you're using, including Windows 10 or even 11.

The following steps can be completed on a Windows 7 computer.

Easybcd create bootable dvd for windows 7 disk